The moral rights of authors and performers: an international and comparative analysis

This book is a comprehensive guide to the development and utilization of authorial moral rights across the key jurisdictions of the English-speaking world and in France and Germany. In recent years, the copyright statutes of the common law countries have been expanded by the introduction of provisions dealing with purely authorial rights - moral rights.
The Moral Rights of Authors and Performers discusses the historical development of the rights in Europe, with particular reference to France and Germany, and shows the growth of moral rights theory and legislative coverage up to the late 1930s. During the 1920s the moral rights of authors became the subject of international protection, particularly through the operation of the Berne Convention for the Protection of Literary and Artistic Works. The book explores the adoption of moral rights into this and other international instruments, explaining the functions that moral rights were intended to perform.
The author gives detailed accounts of the operation of moral rights in France and Germany today, addressing both statutory interpretation and doctrinal issues. The provision of case studies gives an impression of the rich jurisprudence associated with the rights in these countries.
The book also contains a detailed discussion of the versions of moral rights that have become entrenched in Canada, the UK, the US and Australia, with each country considered independently. It deals separately with the introduction of the rights into each country and their operation and interpretation by courts and commentators. Material on common law analogues to the rights is provided, which indicates alternative actions that practitioners might take. Problems of cross-jurisdictional legal proceedings (especially arising from technological transfer of information) are also addressed, with moral rights protection elsewhere in the world summarized in tabular form.

Modeling and comparative analysis of carbon nanotube and boron nitride nanotube cantilever biosensors

This paper investigates the bending deformation of a cantilever biosensor based on a single-walled carbon nanotube (CNT) and single-walled boron nitride nanotube (BNNT) due to bioparticle detection. Through 3-D modeling and simulations, the performance of the CNT and BNNT cantilever biosensors is analyzed. It is found that the BNNT cantilever has better response and sensitivity compared to the CNT counterpart. Additionally, an algorithm for an electrostatic-mechanical coupled system is developed. The cantilever (both BNNT and CNT) is modelled by accounting that a conductive polymer is deposited onto the nanotube surfaces. Two main approaches are considered for the mechanical deformation of the nanotube beam. The first one is differential surface stress produced by the binding of biomolecules onto the surface. The second one is the charge released from the biomolecular interaction. Also, different ambient conditions are considered in the study of sensitivity. Sodium Dodisyl Sulphate (SDS) provides better bending deformation than the air medium. Other parameters including length of beam, variation of beam's location, and chiralities are considered in the design. The results are in excellent agreement with the electrostatic equations that govern the deformation of cantilever.

Maximum power point tracking techniques for photovoltaic systems: a comprehensive review and comparative analysis

Maximum Power Point Tracking (MPPT) is an important concern in Photovoltaic (PV) systems. As PV systems have a high cost of energy it is essential that they are operated to extract the maximum possible power at all times. However, under non-uniform environmental conditions, which frequently arise in the outdoor environment, many MPPT techniques will fail to track the global peak power. This review paper discusses conventional MPPT techniques designed to operate under uniform environmental conditions and highlights why these techniques fail under non-uniform conditions. Following this, techniques designed specifically to operate under non-uniform environmental conditions are analysed and compared. Simulation results which compare the performance of the common Perturb and Observe (P&O) method, the Particle Swarm Optimisation (PSO) and the Simulated Annealing (SA) MPPT approaches under non-uniform environmental conditions are also presented. The research presented in this review indicates that there is no single technique which can achieve reliable global MPPT with low cost and complexity and be easily adapted to different PV systems.

Behavioral versus demographic predictors of early adoption : a critical analysis and comparative test

Predicting which consumers will be amongst the first to adopt an innovative product is a difficult task but is valuable in allowing effective and efficient use of marketing resources. This paper examines the accuracy of predictions made about likely first adopters based on the most widely accepted theory and compares them to predictions made by examining the relevant past behavior of consumers. A survey of over 1000 consumers examined adoption of an innovative technology: compact fluorescent lightglobes. The results show that variables which were derived from a utility and awareness perspective were a more accurate and managerially useful predictor than the demographic variables derived from the widely accepted theory based on the work of Rogers. It is suggested that these alternative variables could be utilized more readily by marketing managers in many circumstances.

A comparative analysis of opinions of Americans, Australians and Malaysians on the use of biometric devices in workplaces for security and monitoring of worker productivity

Since the September 11, 2001 terrorist attacks in New York, the use of biometric devices such as fingerprint scans, retina and iris scans and facial recognition in everyday situations for national security and border control, have become commonplace. This has resulted in the biometric industry moving from being a niche technology to one that is ubiquitous. As a result. more and more employers are using biometrics to secure staff access to their facilities as well as for tracking staff work hours, maintaining 'discipline' and carry out surveillance against thefts. detecting work hour abuses and fraud. However, the data thus collected and the technologies themselves are feared of having the potential for and actually being misused - both in terms of the violating staff privacy and discrimination and oppression of targeted workers. This paper examines the issue of using biometric devices in organisational settings their advantages, disadvantages and actual and potential abuses from the point of view of critical theory. From the perspectives of Panoptic surveillance and hegemonic organisational control, the paper examines the issues related to privacy and identification, biometrics and privacy, biometrics and the 'body', and surveillance and modernity. The paper also examines the findings ofa survey carried out in Australia. Malaysia and the USA on respondents' opinions on the use of biometric devices in everyday life including at workplaces. The paper concludes that along with their applications in border control and national security, the use of biometric devices should be covered by relevant laws and regulations. guidelines and codes of practice. in order to balance the rights to privacy and civil liberties of workers with employers' need for improved productivity, reduced costs, safeguards related to occupational health and safety, equal opportunity, and workplace harassment of staff and other matters, that employers are legally responsible for.

Comparative analysis of student perceptions : impact on satisfaction among international postgraduate students from China, India, Indonesia and Thailand

The paper undertakes a comparative analysis of the gap in student expectations and perceptions on key service quality factors influencing the choice of Australia as a study destination by international postgraduate students of Asian origin and their relationship with student satisfaction. Based on the theoretical framework of expectancy-disconfirmation paradigm, the paper examines the differences in student perceptions of the level of service quality related to the key factors of choice among four groups of students from China, India, Indonesia and Thailand using structural equation modelling, ANOV A and MANOV A. It concludes with strategic implications for universities.

What do they think when we stack them in? A comparative analysis of student perceptions relating to large and small marketing subjects

University education is in a period of flux with emphasis being focused on quality education, competition for students both local and international as well as changes in governmental financial support and direction. It is with this scenario as a backdrop, that universities in an endeavour to obtain economies of scale offer subjects with large student enrolments. This study investigates marketing students’ perception of and participation in marketing subjects relating to teaching quality, staff availability and support, and individual student involvement in marketing education with large enrolments compared to subjects with small enrolments. This research builds on the investigations of effects of class size by Cuseo (2004) and Binney et al (2004). The study used a multi-method approach. Data from a sample of 621 students was analysed using Factor analysis, MANOVA and ANOVA. Students indicated that there was little difference in the quality of learning obtained in small or large classes. Of interest from a marketing perspective, however, is the perception by students that they are more likely to obtain practical assistance and support from tutors in smaller classes. Student perceptions generally show no major differences between large and small classes in relation to subject selection, ability to learn and lecture  attendance. Students expressed a preference for the opportunity to choose from a number of lecture streams available in subjects with large enrolments. Of interest, however is the student belief that they are less likely to actively participate in large lectures than in small lecture environments.

Comparative analysis of study orientations on on campus and offshore students

Understanding how students learn is fundamental in the quest for improving learning outcomes of students who are becoming increasingly diverse and mobile. Using a revised SPQ2F instrument (Biggs & Leung, 2001), this study undertakes a comparative analysis of the study approaches of on campus and offshore students and their perceptions of their learning strategies related to a marketing unit in an Australian university. The results indicate that the majority of students seem to adopt deep learning rather than surface learning approaches, though on campus students appear to have deep learning orientations compared with off shore campus students.

The moral reasoning abilities of Australian and Malaysian accounting students : a comparative analysis

If national culture is a significant determinant of ethical attitudes, it is not unreasonable to expect ethical decision-making to be influenced by one's culture. However, problems arise when the notion of right differs from one culture to another. The question addressed in this paper is whether the moral reasoning abilities of Australian and Malaysian accounting students in their final year of study differ because of their cultural upbringing. This study uses primary data collected from 34 final year accounting students (12 Australian and 22 Malaysian) enrolled in an Australian degree program. The test scores collected at the beginning and end of the academic year indicate that culture and other explanatory variables do not have an affect on students' moral judgment. The findings in this study suggest that culture as an independent variable does not influence the way accounting students analyse and resolve ethical dilemmas.

Inflation and economic growth : a comparative analysis of Australia and the Philippines

Investigates the effects of inflation on economic growth in Australia and the Philippines using time-series data for each country. Uses time-series quarterly data sets covering the period 1970-1995 for Australia and 1950-1994 for the Philippines. A production function approach is used. Inflation was found to have a negative and statistically significant but differing impact on growth in both countries.